Photoelectric effect explained simply with red and ultraviolet light

By Julia Berens · · 4 min read

Five fan-equipped electronic modules sit on a white workbench rig with looping gray cables, glowing pink switches, and purple LED lighting.

Here is the photoelectric effect explained simply: shine dim ultraviolet light on a metal and it can knock electrons loose. Shine bright red light on the same metal and it may knock none loose. That happens when the metal's threshold frequency lies between the frequencies of the two beams. The red beam can deliver more energy to the surface each second, but each red photon still carries less energy than a single ultraviolet photon.

The photoelectric effect explained simply with two beams

Imagine a clean metal plate in a vacuum chamber. A nearby collector is held at a positive voltage so that it attracts electrons that escape from the plate. If electrons reach the collector, a meter can register a current. Now shine the two beams on the same patch of metal, one at a time. Use a red beam and an ultraviolet beam, each with a narrow range of wavelengths, so that the result does not depend on stray light of another color.

Start with the red beam. Its photons are below the energy threshold for this metal, so the meter shows no current from ordinary single-photon emission. Turn up the intensity without changing the wavelength, and there is still no such current. Now switch to the ultraviolet beam. Its photons are above the threshold. Even at low intensity, some electrons escape. The current may be small, but a sensitive enough meter can detect it.

This comparison does not mean that ultraviolet light always frees electrons or that red light never does. The result depends on the surface. A different surface can have a different threshold, so you need to know both the photon energy and the energy needed for escape.

Frequency sets the energy of one photon

A photon of frequency f has energy E = hf, where h is Planck's constant. Ultraviolet light has a higher frequency than red light, so an ultraviolet photon carries more energy. You can also write the equation as E = hc/λ, where c is the speed of light in a vacuum and λ is the wavelength in a vacuum. The shorter the wavelength, the higher the photon energy.

The minimum energy needed to remove an electron from a metal surface is called the work function, written φ. In single-photon emission, an electron absorbs energy from one photon. If that photon carries less energy than the work function, there is not enough energy in that event for the electron to escape. The threshold frequency f0 is where the photon energy equals the work function: hf0 = φ.

Above the threshold, the excess energy sets the maximum kinetic energy of an escaped electron: Kmax = hf − φ. Not every emitted electron comes out with that much energy. Some start in states that require more energy to escape, and some lose energy on the way to the surface. The equation gives the upper limit, not the energy of every electron the collector receives. OpenStax's treatment of the photoelectric effect shows how that limit can be measured.

Intensity changes the photon arrival rate

In physics, intensity is power per unit area. Compare two beams of the same wavelength shining on the same area. If one has twice the intensity, it delivers twice the energy per second to that area. Since the photons in both beams have the same energy, the stronger beam delivers twice as many photons per second. Increasing intensity does not make the individual photons more energetic.

For light above the threshold, more arriving photons give more opportunities for electrons to absorb enough energy and escape. Not every incoming photon produces an escaping electron. Some photons reflect off the surface, for instance. Still, if the surface and collection conditions stay the same, increasing the intensity in the ordinary single-photon regime increases the emission rate without changing the maximum kinetic energy.

For light below the threshold, more photons mean more arrivals with too little energy per photon. The simple experiment is not one in which an electron steadily saves up energy from a series of red photons until it can leave. Under special conditions, such as very intense laser pulses, an electron can absorb more than one photon in a single process. That is a different regime from the two-beam comparison.

An energy budget for red and ultraviolet light

Take a model metal surface with a work function of 3.0 electron volts (eV). Red light at 650 nanometers carries about 1.91 eV per photon. Ultraviolet light at 350 nanometers carries about 3.54 eV per photon. Both estimates come from dividing about 1240 eV nanometers by the wavelength in nanometers. The guide to converting electron volts to joules is useful if you want to do the same calculation with Planck's constant in joule seconds.

A 1.91 eV photon falls short of the 3.0 eV work function. A 3.54 eV photon clears it, leaving up to about 0.54 eV as kinetic energy. Doubling the red intensity at 650 nanometers leaves each red photon at 1.91 eV. Doubling the ultraviolet intensity at 350 nanometers leaves the maximum electron kinetic energy at about 0.54 eV, even though more electrons can escape each second.

Now try 400 nanometers on the same model surface. Before calculating, decide which quantity you need to compare with 3.0 eV. The GQMC training and practice problems offer more practice turning a physical setup into a calculation. At 400 nanometers, the photon energy is about 3.10 eV, so an electron can escape with at most about 0.10 eV. If a detector misses these electrons, that alone does not show that emission stopped: a small voltage opposing their motion can keep such slow electrons from reaching the collector.

Frequently asked questions

Can red light ever knock an electron loose?

Yes. Red light can cause single-photon emission if the surface's work function is low enough for one red photon to supply the required energy.

Does brighter ultraviolet light make the electrons faster?

Not if the wavelength stays fixed and ordinary single-photon emission applies. Higher intensity can increase the number of electrons emitted per second, but it does not raise their maximum speed.